These 6kW (single phase) and 9kW (three phase) large and stylish boilers will cope with the most demanding situations where large volumes are needed in a short period. All feature twin taps for speedy delivery.
Features and Benefits
· Integral seven day programmable timer
· Energy saving ECO mode
· Temperature programmable between 80 °C - 98 °C
· Comprehensive diagnostics system
· Integral stainless steel drip tray included
Plumbing
Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4 BSP) hose supplied.
An isolating valve should be installed between the supply and the heater.
Rear supply connection and choice of rear or front overflow.
Electrical
The CT6000-9 and CT8000-9 are both 9kW and require a 400 volt, three phase supply.
Construction
Brushed stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
WRAS approved.
Height (mm) 608
Width (mm) 440
Depth (mm) 555
Tap clearance to drip tray (mm) 165
Rear connection clearance (mm) 45
Power loading (kW) 9
Heat-up time (mins) 23
Recovery Rate (litres) 1.4
Stand by Power (kW/h) 0.17
Rapid Draw-Off (litres) 36
Rapid Draw-Off (cups) 216
Hourly Output (litres) 85
Hourly Output (cups) 500
* Based on 6 Cups Per Litre