The 1000C is designed for those locations where space is limited but standards are high. Made to Instanta's exacting specification criteria, the 1000C is the boiling water solution for small to medium sized catering establishments.
Features and Benefits
· Self diagnostics system
· Long-life incoloy element
· Well insulated for minimal heat loss & energy use
· Stainless steel drip tray included
· Complete with 1.75 metres of cable & 13 amp plug
Installation
Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4 BSP) hose supplied.
An isolating valve should be installed between the supply and the heater.
Rear supply connection and choice of rear or front overflow is available (rear option requires kit not supplied).
Electrical
To be connected to 230 volt supply with a suitable break capacity.
Construction
Mirror finished stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
WRAS approved.
Height (mm) 440
Width (mm) 218
Depth (mm) 465
Tap clearance to drip tray (mm) 150
Rear connection clearance (mm) 50
Depth excluding drip tray (mm) 345
Power loading (kW) 3
Heat-up time (mins) 16
Recovery Rate (litres) 0.5
Stand by Power (kW/h) 0.066
Rapid Draw-Off (litres) 5
Rapid Draw-Off (cups) 30
Hourly Output (litres)27
Hourly Output (cups)162
* Based on 6 Cups Per Litre